2017-2021 HONDA CIVIC 1.5L TURBO EX AND SI SINGLE DISC CLUTCH KIT FX350: 08150-HDFF-D
When upgrading the 1.5L Turbo engine in the 10th Gen Honda Civics, the stock clutch and flywheel leaves a lot to be desired. Quite quickly the stock clutch becomes incapable of supporting power upgrades and more aggressive driving on a race track. Clutch Masters offers a complete lineup of single and twin disc, as well as single mass aluminum and steel flywheels to suit your cars current and future needs.
This dampened disc MUST be used with a single mass flywheel and is not compatible with the OEM dual mass flywheel.
FX350 clutch kits have a 100% increase in holding capacity over factory clutch. This means the FX350 will hold 110% more horsepower and torque over your stock clutch.
The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs. *
- Heavy-Duty Segmented Fiber-Tough Disc
- Steel Backed Segmented Fiber-Tough Friction Material
- Heavy-Duty Sprung Hub
- Marcel Spring Wafer
- OEM or better Release Bearing
- Pilot Bearing
- Alignment Tool
- Instruction Card
- Item Requires Shipping
- 15.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.