Additional Images

Acura RSX - 2002-2006 : 5 and 6 Speed K20 | 08037-SSTZ

FX300SS Short Shift Single Disc Clutch Kit

08037-SSTZ
Pricing: $749.00

Customize Your Item

- Flywheel -
 * required
- Wilwood Clutch Master Cylinder -
 * required
- Hydraulic Release Bearing -
 * required
- Add Flow Control Valve -
 * required
Qty:

Description

Our Short Shift (or SS) series of billet aluminum clutch covers were designed to take a typical single disc clutch kit to that next level of performance. From the get go our engineers sat down to develop a clutch kit that was street friendly, allowed for faster shifts, lighter rotating mass, and the consistent pedal feel you expect from a clutch on the track". To accomplish this we took everything we've learned from decades of perfecting our 725 Series Twin Disc clutch kits and designed it around the fitment of an OE style clutch cover. By doing this we've created something we feel is perfect for those enthusiasts that want every last bit of performance they can eke out of their car. The Short Shift series of clutch kits are perfect for the daily driven street car as well as a dedicated race car that doesn't make the power to necessitate a twin disc. 

Features of Short Shift Billet Clutch Kits:

  • Shorter, faster, more precise shifts
  • 10% lighter then OE stamped steel cover
  • Fits stock single disc flywheel (or any aftermarket single disc flywheel designed for OE style clutch kits)
  • Heavier diaphragm allows more clamping force to be obtained
  • Modified pivot point on steel casting makes pedal feel minimally heavier then a stock clutch. 
  • Works with factory hydraulics (For best results we recommend our internal hydraulic release bearing and master cylinder upgrades)
  • Comes with new throw out bearing specifically designed to take advantage of the short throw of the clutch
  • Available in several different disc material configurations for street or track use 

The FX300SS kit utilizes a steel backed segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. This kevlar disc found in our FX300 series kits has proven to be one of our most successful single disc clutch options over the years. By combining the use of Kevlar friction material in a segmented format, we create more pounds per square inch, allowing more torque holding capacity while still delivering exceptional life. Our Kevlar material is non-abrasive and doesn’t score the mating surfaces. The FX300SS is recommended for the street and not for track use. There is a minimum of 500 mile break in period required with this clutch.

FX300SS Kit Includes:

  • 6061 billet aluminum, CNC machined, hard anodized clutch cover
  • Heavy-Duty Segmented Kevlar Disc
    • Steel Backed Segmented Kevlar Friction Material
    • Heavy-Duty Sprung Hub
    • Marcel Spring Wafer
  • High Performance Release Bearing
  • Pilot Bearing
  • Alignment Tool
  • Instruction Card
  • Decals

** DOES NOT INCLUDE FLYWHEEL **

** Short Shift series covers for the K20/K24 only fit the 2002-2011 6-speed flywheel. If you have any year 5-speed or a 6-speed from later gen 2.4L SI (2012-2015) you will need a flywheel as well. You can use our FW-037-SF or AL flywheels **

Shipping Information

  • Item Requires Shipping
  • 15.0 lbs.
  • W12.0000” x H12.0000” x L4.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.