FX250 SS Series Twin disc

The Clutch Masters Factory Fit FX250 Series Twin Discs kit for the 2014-2019 BMW F80 M3 AND F82 M4 with the renowned S55 engine and a 6-Speed manual transmission was developed to bridge the gap between replacing the comfortable driving twin disc that came in these cars from the factory and one of our more race orientated 725, 850 or 1000 Series twin disc kits. As OE auto manufactures continue to push for more and more power, they are typically equipping those cars lucky enough to be outfitted with a manual transmission with a twin disc clutch. But what happens when the factory clutch starts to wear out or slip because you've modified and tuned the car? Lots of owners of these higher end powerful cars still want to maintain a car that is easy to drive on the street, yet still be able to reliably take the abuse they inevitably want to throw at it. Most aren't looking to go full race car and install a twin disc designed for such use, there has to be a compromise.

Our answer to these dilemmas is our Factory Fit FX Series Twin Disc Clutch Kits. Using components similar to what came in the car from the factory, our engineering team does everything they can to expand and improve upon the OE twin disc in many ways. Using higher end friction materials, lighter materials and our expertise in developing performance clutch kits for over 45 years, we dial in a twin disc kit that bridges the gap between full race car and luxury daily driver making serious horsepower. In the case of the BMW G8X twin disc, we have done away with the factory self-adjusting cover, a little over 10lbs of weight reduction in the entire assembly, and we have gone from an 8.5" clutch disc to a 9.5" disc for significantly more disc surface area. 

The Clutch Masters FX Series Twin Disc kits utilize our proven friction materials found in our FX Series Single Disc Clutch kits and are available in several different configurations to suit you and your cars needs.

The Factory Fit FX250 Series Twin disc will come as a complete replacement kit utilizing a lightweight aluminum Type 3 hard anodized flywheel, steel floater, factory style stamped steel cover, two DLX clutch discs utilizing a combination of our Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc, throw out bearing, and clutch fork.

This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar disc without compromising the street friendly characteristics

*Kit pictured is our FX400 series*

** It is highly recommended to eliminate the factory clutch delay valve. Not only will removing this piece improve the cars ability to shift quicker more efficiently, it will also help improve the lifespan of your new clutch **