Click on image to zoom


Single Disc Clutch Kits

Rigid disc designed to be used with OEM flywheel (228mm)
Availability: Good In Stock, ETA 1-3 Days
Pricing: $729.75

Free Ground Shipping, Lower 48


110% Increase in Holding Capacity - STREET/RACE
  • Kits beginning with 02240 are 240mm Upgraded Conversion Kits. The OEM clutch kit from factory is a smaller 228mm. The Clutch Masters 240mm upgrade kit has a higher holding capacity, higher life expectancy, and less expensive than the OEM 228mm size clutch units. The 240mm upgrade kit must use a Clutch Masters specific flywheel FW-240-SF. If you want to stick with a OEM size clutch unit then use kit numbers kit numbers 02027.
  • The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs. *

    • Heavy-Duty Segmented Fiber-Tough Disc
      • Steel Backed Segmented Fiber-Tough Friction Material
      • Heavy-Duty Sprung Hub (when applicable)
      • Marcel Spring Wafer
    • OEM or better Release Bearing
    • Pilot Bearing (when applicable)
    • Alignment Tool
    • Instruction Card
    • Decals

    *Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.


    Pressure Plate, Disc, Tool, Release bearing


    300 ft.lbs (estimated)



    Shipping Information

    • Item Requires Shipping
    • 13.0 lbs.
    • W16.0000” x H16.0000” x L4.0000”
    • Free Ground Shipping, Lower 48
    • This item ships in its own box.

    Customer Reviews

    Comment Total Reviews (0)

    Write the First Review!

    You must login to post a review.