FX200

70% Increased Holding Capacity

Our Short Shift (or SS) series of billet aluminum clutch covers were designed to take a typical single disc clutch kit to that next level of performance. From the get go our engineers sat down to develop a clutch kit that was street friendly, allowed for faster shifts, lighter rotating mass, and the consistent pedal feel you expect from a clutch on the track. To accomplish this we took everything we've learned from decades of perfecting our Twin Disc clutch kits and designed it around the fitment of an OE style clutch cover. By doing this we've created something we feel is perfect for those enthusiasts that want every last bit of performance they can get out of their car without sacrificing anything. The Short Shift series of clutch kits are perfect for the daily driven street car as well as a dedicated race car that doesn't make the power to necessitate a twin disc. 

Features of Short Shift Billet Clutch Kits:

• Shorter, faster, more precise shifts
• 10% lighter then OE stamped steel cover
• Fits stock single disc flywheel (or any aftermarket single disc flywheel designed for OE style clutch kits)
• Heavier diaphragm allows more clamping force to be obtained
• Modified pivot point on steel pressure plate casting makes pedal feel minimally heavier then a stock clutch. 
• Works with factory hydraulics (For best results we recommend our internal hydraulic release bearing and master cylinder upgrades)
• Comes with new throw out bearing specifically designed to take advantage of the short throw of the clutch
• Available in several different disc material configurations for street or track use 

The FX200 System uses the Power Plus I Heavy-Duty Pressure Plate with a steel backed Kevlar friction material disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque holding capacity to the FX100, however, it’s life expectancy is increased 2-3 times with the Kevlar disc. This clutch is a great option if you drive your car aggressively but only have simple bolt-ons. Our Kevlar friction material is non-abrasive and doesn’t score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer.

• Heavy-Duty Disc
  • Steel Backed Kevlar Friction Material
  • Heavy-Duty Sprung Hub (or Ridged hub when applicable)
  • Marcel Spring Wafer
• OEM or better Release Bearing
• Pilot Bearing (when applicable)
• Alignment Tool
• Instruction Card
• Decals

*Organic/ Kevlar/ Formula Button Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.