FX350

110% Increase in Holding Capacity - STREET/RACE

The FX350 System uses the Power Plus I, Hi-Levarage, Heavy-Duty Pressure Plate utilizing our Fiber-Tough friction material. This clutch has a slightly increased holding capacity then the FX300 but will have a slightly more aggressive engagement and will produce some chatter. Similar to the FX300 this clutch is designed for the serious street enthusiast who also might spend a weekend and the track and is running a normally aspirated car that has been highly tuned with cylinder head work such as cams, or with a medium-boost turbo or supercharger setup, or up to 100hp NO2. For years enthusiasts have had to compromise durability for longevity for drivability and vice versa, however with our Fiber-Tough material we have closed the gap between these two tradeoffs. 

****NOTE**** Our BRZ/FRS/86 clutch kits are designed to be used with our lightweight steel flywheel only. These clutch kits are conversion kits that upgrade the size of the disc and the actual clutch cover is changed. out for a significantly more robust one. This is a known weak spot with the factory clutch kits these cars come with. So to use this clutch kit, you must also have or purchase our flywheel found HERE. 

Kit Includes:

• Heavy-Duty Segmented Fiber-Tough Disc
• Steel Backed Segmented Fiber-Tough Friction Material
• Heavy-Duty Sprung Hub (when applicable)
• Marcel Spring Wafer
• OEM or better Release Bearing
• Pilot Bearing (when applicable)
• Alignment Tool
• Instruction Card
• Decals

*Organic/ Kevlar/ Fiber-Tough Clutch kits are expected and tend to have a higher life expectancy than OEM, however not guaranteed. Improper Installation, Driving style, performance upgrades, Break in procedure and light weight flywheels will effect and have a role in determining the life expectancy of the clutch kit.